Door Check Rod Seal – T3/LT

Often missing as they get pulled off for paintwork, or just wear away.
These foam seals go around the door check rods on the A pillar.

checkstrapseal

 

Webshop Link

Intake Hose for T3 2E “GTI” Conversions

Intake hose for the popular 2E (2.0 “GTI”) conversions.

2eintake2

 

Allows you to site the air flow meter in the rear light void, and has provision to connect the breather.

Webshop Link 

T3 Westfalia High Top Roof Window Seal – 255 070 419 A

For the double glazed window at the Front of the Wesfalia High Top

 

hightopseal

 

Webshop Link

Brickwerks T3 Handling Kit – Spax/Eibach/Powerflex

We like the new Spax kit in combination with the Eibach Springs so much, we’ve put this little kit together.

kit

 

The tried and trusted Brickwerks Eibach Pro-Kit 40mm springs combined with a set of Spax Krypton Gas Adjustable dampers and  a set of our most popular Powerflex bushes – the Steering Rack Mounts.

Buying the kit results in a saving of around £40… over the seperate parts and will give your T3 a great ride, a sensible drop, and better steering feel.

Webshop Link

More T3 Suspension Goodness! T3 Spax Gas Adjustable Dampers

Now in stock, on the shelf, ready to ship!

spax

Sold in pairs or as a set. Suitable for all lowered 2WD models down to 70mm

Front
Rear
Vehicle Set

 

We’re here! We’re open!

Despite the snow we are here and we are open.

We physically take the Royal Mail orders to the Post Office [in the Iltis] so they will 100% leave today.

FedEx are usually quite good so I can’t imaging there being any problems there, hopefully service as normal.

Workshop open as usual, although Michael had to rescue Angus from the top of the hill he lives on!

Trailmaster Springs and Dampers for T3 Syncro

Trailmaster is a well known name amongst 4×4 owners, and we can now supply their dampers and springs for Syncro models.

trailmasterkit

 

There are 2 kits available, for standard weight vehicles… panel vans, pickups, and lightweight campers… and the HD Kits for heavier vans carrying more weight or with full on camper conversions above 2400kg.

Dampers come in a few choices for sportier (road) ride or comfort ride, which is for more serious off road use.

Springs… just one front spring regardless of weight, and a choice of rear springs for lighter and heavier vehicles.

At the moment, these will drop ship from Trailmaster, and all webshop prices include delivery.
It may be that we choose to hold these in stock in the future for quicker delivery.

Kit for Standard Weight Vehicles
Kit for Heavy Weight Vehicles

Rear “Sport” Dampers (20mm Lift)
Rear “Comfort” Dampers (20-40mm Lift)
Rear “HD” Dampers (20-40mm Lift) for vehicles over 2400kg

Front “Comfort” Dampers (0-40mm Lift)
Front “HD/Sport” Dampers (0-40mm Lift) for vehicles over 2400kg or those which see mostly on road use

Rear Springs (40mm Lift)
Rear Springs HD (40mm Lift ) for Vehicles over 2400kg
Front Springs (40mm Lift) 

The reason your 2 litre went pop…

image

Quite simple this one! Years and years of accumulated muck sitting on top of the cooling fits stopping it getting cooled. If we were to strip it I’m sure we would see localised areas of wear on the cylinder bore. The oil cooler is also in a similar state, ticking time bomb that went off this one!

Check your engine mounting bar

image

Just replacing a 2.0l cooled engine. We saw a scab on the bar so we picked it! Good job we did! Break out the mighty mig Baxter!

Check your engine mounting bar

image

Just replacing a 2.0l cooled engine. We saw a scab on the bar so we picked it! Good job we did! Break out the mighty mig Baxter!